Zero Distance Drop Test Machine (VS-1019)

  • Zero Distance Drop Test Machine (VS-1019)
VS-1019Zero Distance Drop Test Machine (VS-1019)
  • Product Description
  • Product Feature
  • Product Specification
Zero distance drop test machine
  • Option1: Clip-on fixture designed specifically for hand-held device testing.
  • Option2: digital control box, automatic lift control, can solve the problem of error resulted from observation of indicator more than 160cm test.
  • The swing arm system is controlled by the air pressure for fast and precise positioning.
  • Maximum load: 300Kg, test height 0-100cm, allowing measurementsample size 100x100cm, power requirements 220V single-phase, air pressure requires more than 5kg / cm2.
  • Lifting method: using motor drive, height can be adjusted.
  • Test angle: angle, line and face of packaging container.
  • Micro switch: upper and lower limits with micro-switch to prevent accidental operation of the impact, to protect the machine.
  • Tape measure: With 100cm long rolltape, and the indicator that can quickly see the actual scale movements.
  • Fall plates: a group of 3-5 claws, the use of aluminum alloy material which does not rust, and falling noise is small.
  • Control button: The use of the button magnetic switch, only a light press on the DROP button, the plates can automatically fall, and can be adjusted up and down.
  • Leadscrew pole: the level of fall with round lead screwpole,can liftup and down vertically and smoothly.
  • Control box: The machine and the control box are separated and can be controlled in a safer way to prevent the operator from injury due to falling.
  • Grinding rod: The spindle with three ψ150 mm, all use the grinding spindle, to prevent swinging from side to side.
  • Horizontal angle: There are four horizontal adjustableangles, with adjustable base level.
Cushion packaging design, packaging material selection, packaging contend design, drop specifications test.