Drop Tester for handheld digital devices

* External dimensions of the machine: 70 (W) x 100 (D) x 280 (H) cm
* The weight of the test object: 3kgw or less
* Test height: 20-200 cm.
* Maximum holdable test object range: 0~20cm
* Stick the clamp contact surface with a soft protective pad
* Lifting method: Adopt motor drive, high and low can be adjusted manually.
* Test object clamping: pneumatic clamping.
* With the lower limit air pressure clamp off sensor detection device.
* With upper limit switch protection device.
* Drop the double guide column precision high rigidity bearing steel × 2, to prevent left and right swing.
* Drop pneumatic clamp with linear bearing.
* With aluminum extruded beam column × 2, upper limit switch protection, electronic control loop control box, drop air pressure ring switch.
* oil pressure buffer can absorb the impact energy of the falling fixture to ensure the life of the machine
The test object alone hits the ground, and the impact point can be accurately tested. The test object alone hits the ground, and the impact point can be accurately tested. It can be automatically reset.
* With automatic height controller and display panel.
* Provide trigger signal to external high-speed camera
* Rigid impact on the bottom plate

Buffer packaging design, packaging material selection, packaging counterbalance design, drop specification test.